top of page

How to Measure for a Sofa: Your Room, Doors, Stairs and Tight Turns

A sofa that fits your room still has to get there. Most delivery surprises happen on the way in, at a narrow door, a staircase or a tight turn into a hallway. Ten minutes with a tape measure before you buy saves a lot of trouble on delivery day. Here is how to measure, step by step.

Book a Free Design Consult   |   Get a Quick Price

Step 1: Measure the room

Start with the wall the sofa will sit against. Measure its length, and note windows, vents, outlets and doors along it. Then mark the sofa’s outline on the floor with painter’s tape. Seeing the footprint in the room tells you more than numbers on paper.

A common guideline is to leave about 30 to 36 inches for people to walk around furniture, and to keep a coffee table about 14 to 18 inches from the sofa.

Step 2: Measure the way in

Walk the path from the truck to the room and measure every tight spot along it. Use the narrowest number you find, because that is the one that decides whether the sofa gets through.

  1. Doors: measure the width of each doorway with the door fully open, from the edge of the open door to the frame. Then measure the height of the opening.

  2. Hallways: measure the narrowest point, and the ceiling height anywhere it drops.

  3. Stairs: measure the stair width, the lowest point of the ceiling above the stairs, and anything that sticks out, like railings or light fixtures.

  4. Turns and landings: where the path turns, measure the width of the hallway you’re coming from, the width of the opening you’re turning into, and the depth of the landing.

Tight turns, like a basement with a narrow hallway

Picture carrying a sofa down basement stairs, then making a 90 degree turn into a narrow hallway at the bottom. The sofa has to swing around the corner while it is still partly on the stairs. A long sofa can be too long to make that turn even when every opening on the way is wide enough.

That is why three numbers matter most at a turn: the width of the stairs or hall you’re coming from, the width of the hall or doorway you’re turning into, and the depth of the landing between them. Take a phone photo of each turn from both directions. A photo shows a designer things a tape measure misses, like a low beam or a handrail.

Step 3: Measure the sofa

You’ll find these on the product details, or on the tag of any piece in our showroom.

  1. Width: arm to arm, the longest side.

  2. Depth: front to back.

  3. Height: floor to the top of the back.

  4. Diagonal depth: this is the number that most often gets a sofa through a door. Lay a yardstick across the sofa from the top of the back to the front edge of the seat. Measure from the back bottom corner of the sofa straight up to the yardstick. That distance is the diagonal depth.

Step 4: Compare the numbers

  • A sofa goes through a doorway long end first. If the doorway is wider than the sofa’s height or its depth, it will usually fit. If not, it can often be angled through on its back, as long as the doorway is wider than the diagonal depth.

  • Leg height counts. Our delivery team removes the legs when that helps a sofa through a tight spot, so measure the height without them too.

  • At turns, the numbers alone can’t tell you for sure. Bring your measurements and photos to us and we’ll check the fit with you.

When the path is tight

  • Choose a sectional. A sectional arrives in separate pieces, so each piece is smaller than a one-piece sofa and can get where a sofa can’t.

  • Let us take the legs off. Our delivery team removes the legs when that helps a sofa through a tight door or turn.

  • Order it in your size. With True Custom by Bassett you choose the size, fabric and comfort of your sofa or sectional, so it can be built to fit your room and your way in.

  • Check before you order. Your designer reviews your measurements with you before anything is ordered.

What to bring to your free design consult

  • ☐ The length of the wall and the room

  • ☐ Door widths (door fully open) and heights along the path

  • ☐ Hallway widths at the narrowest point

  • ☐ Stair width and the lowest ceiling point over the stairs

  • ☐ Width of each side of every turn, plus the landing depth

  • ☐ Phone photos of each turn, from both directions

Not sure it will fit? Bring your numbers to our Waynesboro showroom, near Charlottesville, and a designer will check the fit with you for free.

Book a Free Design Consult   |   Get a Quick Price

 

Sofa measuring questions

What is diagonal depth?

It’s the measurement that tells you whether a sofa can tip through a doorway on its back. Lay a yardstick from the top of the back to the front edge of the seat, then measure from the back bottom corner up to the yardstick.

Will a sofa fit through my door?

Measure the doorway with the door fully open. If it’s wider than the sofa’s height or depth, the sofa will usually fit. If not, compare it to the diagonal depth, since a sofa can often be angled through on its back. If it’s close, bring your numbers to us and we’ll check.

What if my basement stairs turn at the bottom?

Measure the stair width, the hallway or doorway you turn into, and the landing depth, and take photos of the turn from both directions. A sectional, which arrives in pieces, often makes turns a one-piece sofa can’t.

Can I order a sofa in a size that fits?

Yes. Many of the sofas and sectionals we carry can be custom ordered, including True Custom by Bassett, where you choose the size, fabric and comfort.

Will you check the fit before I order?

Yes. Bring your measurements and photos to a free one-hour design consultation in our Waynesboro showroom, and a designer will check the fit with you before you order.

Under the Roof Furniture · 406 West Main Street, Waynesboro, VA 22980 · 540-949-5044 · Open Tuesday to Saturday, 10am to 6pm · Serving Charlottesville, Staunton, Harrisonburg and the Shenandoah Valley · © 2026, locally owned since 1994

bottom of page